Experience Counts!

Sealing/Isolating Gaskets and Flange Isolation Kits

Sealing and Isolating Gaskets Two of PSI's premier sealing gaskets are available with isolating retainers. Both LineBacker® and GasketSeal® gaskets may be ordered with isolating reatiners to match your application. In addition, you may choose from a wide variety of sealing elements so your completed gasket will consist of a combination of the best materials to seal the flange and maintain that seal for the life of the piping system.

LineBacker® Sealing/Isolating Gaskets GasketSeal® Sealing/Isolating Gaskets LineSeal™ Xtreme Critical Service Sealing Gaskets

Non-Isolating - Sealing Gaskets Three of PSI's premier sealing gaskets are available with non-isolating (metallic) retainers. In addition to the LineBacker® and GasketSeal® gaskets, the FlangeMate® sealing gasket features a unique configuration that allows the use of even soft metallic materials (grafoil) to be used as seal elements. The hoop strength of metallic retainers virtually insures against the possibility of a gasket blow-out under any and all conditions.

LineBacker® Non-Isolating Sealing Gaskets GasketSeal® Non-Isolating Sealing Gaskets FlangeMate® Non-Isolating Sealing Gaskets

Flat Isolating Gaskets Flat isolating gaskets are available in a wide variety of dielectric materials to eliminate the possibility of electrical currents passing through the flange. For additional protection, type "E" gaskets extend out to the O.D. of the flange to help eliminate the possibility of any metallic materials inadvertently becoming lodged between the flange faces and thus shoring-out the desired electrical isolation.

Rubber Faced Phenolic Plain Phenolic Red Devil Yellow Jacket Garlock Teflon®

Specialty Gaskets Significant chemical and material composition improvements are now being incorporated into sealing gaskets designed to address the regulations associated with asbestos type gaskets. Three versions are manufactured from new proprietary materials that provide excellent resistance against environmental leakage (zero environmental leakage) without the health hazards associated with asbestos type gaskets. All are available as either "E" or "F" type gaskets in isolating retainer materials.

LineBacker® Zero™ Sealing/Isolating Gaskets LineBacker® 250™ Sealing/Isolating Gaskets LineBacker® 251™ Sealing/Isolating Gaskets LineSeal™ Xtreme Critical Service Sealing Gaskets

Custom Gaskets for Flanges Custom sealing gaskets may be manufactured for flanges from 3/8" diameter and up. For added flexibility and to accommodate a wide variety of flange types, sealing elements may be positioned anywhere between the I.D. of the bold circle and I.D. of the gasket. In addition, PSI can manufacture gaskets with a double seal upon request if flange size, surface condition or other concerns warrant. Please contact factory for more information. Custom Shaped Gaskets Custom shaped gaskets may be manufactured to precise customer specifications for sealing mating surfaces of any configuration.

Contact PSI