How To Order

How to Order Metal Casing Isolators/Spacers

Quantity Type Finish Band Width Runner Width Carrier Pipe O.D. (Type and coating thickness if applicable) Casing Pipe I.D. (Type and coating thickness if applicable) Carrier Pipe Joint O.D. (if applicable) Carrier Pipe Position within Casing Length of Crossing Contact your local distributor or Pipeline Seal and Insulator, Inc. Click here to contact Pipeline Seal and Insulator via e-mail. Click here to access literature request. Click here to download RFQ Casing Spacer Worksheet. Click here to access PSI distributor locator. Click here for PSI contact list.

Example

TYPE FINISH	BAND WIDTH	RUNNER WIDTH	CARRIER PIPE O.D.	CASING PIPE I.D.	CARRIER PIPE JOINT/BELL O.D.	POSITION WITHIN CASING
C = Coated	8 = 8" Band 12 = 12" Band	G-2 = 2" Wide Glass Reinforced Runners	Indicate Actual O.D. Including Coating	Indicate Actual O.D. Including Coating	Indicate Actual O.D. Including Coating	S = Standard C = Centered CR = Centered/Restrained NCR = Non-centered/Restrained
EXAMPLE: Coated 12" (305mm) wide steel band casing spacer with 2" (50.8mm) wide glass reinforced polymer runners for a 16" (400mm) ductile iron pipe with a 17.40" (400mm) outside diameter within a casing pipe with a 23.25" (590mm) inside diameter, carrier pipe joint O.D. 20.00" (508mm), standard position.
C	12	G-2	17.40	23.25	20.00"	S

To order end seals please indicate the following:

1. Quantity
2. Model Number
3. Carrier Pipe O.D.
4. Coating Thickness
5. Casing O.D. and Wall Thickness
6. Contact your local distributor or Pipeline Seal and Insulator.

Go To End Seal Pages