Experience Counts!   End Seals Model "C" End Seals Model "C" End Seals are individually designed to accommodate custom carrier/casing combinations. Made of 1/8" thick, specially compounded synthetic rubber for long life and durability, these end seals are designed to last for the life of the piping systems in which they are used. Model "R" Graduated Cone Model "R" End Seals simplify stocking. Only five (5) end seal sizes will accommodate casings from 4" to 24" in diameter with all applicable carrier pipe sizes designated on the unique graduated cone "carrier pipe" end. Made of 1/8" thick, synthetic rubber for long life and durability, these end seals are designed to last for the life of the piping system. Model "S" Standard Pull-on Model "S" End Seals are pre-molded into an "S" shape and are available for ANSI steel pipe specifications. Band locating ribs are on the outside with special sealing ribs on the inside under the band to prevent leakage. Model "W" Wrap-Around End Seals Model "W" End Seals are designed for existing installations. A plastic backing is simply removed to expose the self-curing rubber on both ends of the end seal. Once the two are pressed together a solid bond is created between mating surfaces and carrier/casing pipes. Model "W" end seals are available for all carrier/casing differentials. Model "FW" Fire Resistant End Seals Developed exclusively for situations involving a need for fire retention, Model "FW" end seals are especially useful in tank farms and fire wall applications.